Alcatel-Lucent 1643 AMS User's Operation Manual page 404

Traffic provisioning
Mode of operation
Ethernet point-to-point transport can be realized by using any of the TransLAN
operational modes. However, the preferred mode of operation for the direct
interconnection of two LANs is the repeater mode.
Related information
Please also refer to
Ethernet multipoint transport with dedicated bandwidth
The following figure shows a network example of a multipoint Ethernet over SDH
network with dedicated bandwidth:
LAN
(customer A)
LAN
(customer A)
This multipoint network is dedicated to a single user.
Mode of operation
Ethernet multi-point transport with dedicated bandwidth can be realized by using any
of the following TransLAN
• LAN-VPN mode
• STP virtual switch mode compliant with IEEE 802.1Q
• STP virtual switch mode compliant with IEEE 802.1ad (provider bridge mode)
....................................................................................................................................................................................................................................
8-52
"Repeater mode" (p.
SDH network
®
Alcatel-Lucent - Proprietary
See notice on first page
8-60).
TransLAN equipment
Ethernet connection
operational modes:
Ethernet over SDH applications
®
LAN
(customer A)
LAN
(customer A)
365-312-807R7.2
Issue 4, May 2007