Traffic provisioning
Result:
filled in according to the selected cross-connection.
...................................................................................................................................................................................................
Change Cross Connection Type from Standard to SNC and select the Slot and the Port
4
in the protection area. Click
Result:
points of the selected cross-connection.
...................................................................................................................................................................................................
Select a TP.
5
Result:
...................................................................................................................................................................................................
Select
6
Result:
Connection window closes and the modified cross-connection appears in the list of
the Cross Connection List window.
E
N D
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
8-154
The Edit Cross Connection window appears. The From and To fields are
A list of available termination points appears, including the termination
The TP appears in the selection box.
OK.
The cross-connection between the selected TPs is made. The Edit Cross
O F
S T E P S
Alcatel-Lucent - Proprietary
Add SNC/N protection to an unprotected cross-connection
select
.
See notice on first page
365-312-807R7.2
Issue 4, May 2007