Timing provisioning
Result:
...................................................................................................................................................................................................
Select a port (or a "-") from the list for the Protection Reference.
6
Result:
selected) or the Protection Reference for the timing source is unassigned (in case
"-" is selected).
...................................................................................................................................................................................................
Click
7
Result:
is sent to the network element.
...................................................................................................................................................................................................
Click
8
Result:
E
N D
...................................................................................................................................................................................................
Set QL prov, monitored, switch request, clear wait to restore
To set the quality level for an incoming (SDH) timing reference, set the Monitored
state of the timing reference, make a switch request or clear the Global Wait To
Restore Time follow this procedure:
...................................................................................................................................................................................................
Select Provisioning --> Timing --> Timing Sources
1
Result:
...................................................................................................................................................................................................
Select a source that must be edited from the list and click
2
Result:
...................................................................................................................................................................................................
Select AUTO or a QL value from the list for QL Provisioned.
3
Result:
...................................................................................................................................................................................................
Select Yes or No for Monitored.
4
Result:
...................................................................................................................................................................................................
5
Important! A Switch Request can only be made if a protection reference is
assigned. This is only possible if the 1643 AM or 1643 AMS is working in the
STM-4 mode and STM-1 tributary units are present.
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
A list of all possible ports (or a "-" ) appears for the selected slot.
The Protection Reference for the timing source is selected (in case a port is
OK
to confirm the current settings.
The Assign Timing Reference to Timing Source window is closed and data
Close
.
The Provisioned NE Timing Source Information window disappears.
O F
S T E P S
The Provisioned NE Timing Source Information window appears.
The Edit Provisioned NE Timing Source window appears.
A value is set for QL Provisioned.
The monitoring of the reference of the timing source is set.
Alcatel-Lucent - Proprietary
See notice on first page
Provisioning timing sources
Edit
in the Sources field.
7-21