Alcatel-Lucent 1643 AMS User's Operation Manual page 488

Traffic provisioning
Edit QoS mode
...................................................................................................................................................................................................................................
When to use
To allow the user to manage the configured flow profiles or to use the default flow
profile.
The Edit QoS mode procedure is also applicable to X5IP.
Note:
Procedure
Complete the following steps to edit the QoS mode:
...................................................................................................................................................................................................
Select
1
Result:
...................................................................................................................................................................................................
Select the respective virtual switch and click
2
Result:
...................................................................................................................................................................................................
Click
3
area.
It is recommended only to provide one of the following two values:
•
0x8100
for IEE802.1Q STP
•
0x9100
for IEEE802.1ad STP (provider bridge mode)
...................................................................................................................................................................................................
Select the LAN/WAN port in the
4
Result:
...................................................................................................................................................................................................
Click on
5
Result:
...................................................................................................................................................................................................
In the field
6
•
Flow Configuration
(QoS Flow Tables) (refer to
are used for this port.
•
Default Profile
...................................................................................................................................................................................................................................
8-136
Provisioning → LAN Management → Virtual Switch
The Virtual Switch List
The Virtual Switch List Information
and in the
Edit Edit Virtaul Switch
The
Port Information
Edit .
The Customer/Network Port Information
select the appropriate mode:
QoS Mode
: the Flow Profile definitions in the Virtual Port Descriptor
: the default profile definitions are used for this port.
Alcatel-Lucent - Proprietary
window is displayed.
Details
window select TPID value in the
Port Membership
window is displayed.
"Provision QoS Flow Identification Table " (p.
See notice on first page
.
window appears
field and click on
window is displayed.
Ether Type
Port Details .
8-138))
365-312-807R7.2
Issue 4, May 2007