Alcatel-Lucent 1643 AMS User's Operation Manual page 643

Performance monitoring
Ethernet Service Monitor
...................................................................................................................................................................................................................................
When to use
The following procedure is performed when the user wants to enable the Ethernet
Service monitoring counters. The ethernet service flow PM counters are also known as
flow TP PM, provides performance monitoring for an ethernet pack based on traffic
class and color information.
Note:
Related information
The items below list other relevant information to this procedure:
• Procedure to set the SDH TP Mode, for the required prior setting of the ports to be
monitored. Refer to
•
"Ethernet performance monitoring" (p. 10-12)
•
"Concepts" (p. 10-3)
Before you begin
The items below gives information on tasks to perform before beginning the procedure:
• Proper LAN card must be installed in TS2 in order to be able to make performance
LAN measurements.
• A prerequisite for this procedure is to set
tree mode" (p.
• Cross connection should be enabled and VCG should be set to monitored.
Service monitor
Follow this procedure in order to view the Service monitor counters.
...................................................................................................................................................................................................
Select
1
Result:
...................................................................................................................................................................................................
Select a virtual switch from the list and click Details.
2
Result:
...................................................................................................................................................................................................
Select a LAN port and click Port Details.
3
Result:
...................................................................................................................................................................................................
In the Cutomer Port Information window click Edit.
4
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
The Ethernet Service Monitor procedure is also applicable to X5IP.
"Provision ports" (p.
8-105).
→
Provisioning LAN Management
The Virtual Switch List window appears
The Virtual Switch Information window appears.
The Customer Port Information window appears.
Alcatel-Lucent - Proprietary
5-59).
"Provisioning a virtual switch in spanning
→
Virtual Switch
See notice on first page
.
10-61