Alcatel-Lucent 1643 AMS User's Operation Manual page 461

Traffic provisioning
Reference:
Result:
role) window is displayed.
...................................................................................................................................................................................................
Select the required
5
Rules for PVID and VLAN configuration:
the following rules
1. Unused/unconnected port (i.e. not in a Spanning Tree Mode VS)
• default VLAN Id (/PVID) = 4093
• Acceptable Frame Type (default value as already specified)
2. Customer Port in Virtual Switch Spanning Tree Mode with EtherType/TPID = 8100
(i.e. IEEE 802.1Q mode)
• default VLAN Id (/PVID) = 4093 allowed
• if default VLAN Id (/PVID) = 1.. 4093 then
3. Network Port in Virtual Switch Spanning Tree Mode with EtherType/TPID = 8100
(i.e. IEEE 802.1Q mode)
• default VLAN Id (/PVID) = 4093
• no untag VLAN Ids associated with port (i.e. untagged port member set must
• any number of tagged VLAN Ids associated with the port are allowed
4. Customer Port in Virtual Switch Spanning Tree Mode with EtherType/TPID 8100
(i.e. IEEE 802.1ad mode):
• default VLAN Id (/PVID) = 4093 allowed
• if default VLAN Id (/PVID) = 1.. 4093 then
5. Network Port in Virtual Switch Spanning Tree Mode with EtherType/TPID 8100
(i.e. IEEE 802.1ad mode):
• default VLAN Id (/PVID) = 4093
• no untagged VLAN Ids associated with port (i.e. untagged port member set
• any number of tagged VLAN Ids associated with the port are allowed
...................................................................................................................................................................................................
Select the
6
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Refer to "Flexible port role assignment" (p.
The
Customer/Network Port Information
and the required
PVID
Customer Port: Accept All Frames
Network Port: Only VLAN-Tagged
a untagged VLAN Id = default VLAN Id is associated with that port
be empty)
there is one untagged VLAN Id = default VLAN Id associated with that port 3
(for the VLAN Id = PVID, the customer role port is always in the Untagged
Port Member set)
there are no other VLAN Id (tagged or untagged) associated with that port
must be empty)
Default User Priority
Alcatel-Lucent - Proprietary
Provisioning a virtual switch in spanning tree mode
Acceptable Frame Type
For PVID and VLAN configuration follow
applicable for incoming packets..
See notice on first page
8-77).
(depending on the selected port
.
8-109