Traffic provisioning
Result
...................................................................................................................................................................................................
Select a flow descriptor other than the flow table
7
Result:
...................................................................................................................................................................................................
Click on
8
Result
...................................................................................................................................................................................................
In the
9
the ID of the QoS profile to be used.
Additional info
(p.
...................................................................................................................................................................................................
Continue with
10
...................................................................................................................................................................................................
Choose the Flow Group in the list and click on
11
Result:
...................................................................................................................................................................................................
In the
12
the ID of the QoS profile to be used.
Additional info
(p.
...................................................................................................................................................................................................
Continue with
13
...................................................................................................................................................................................................
Select the Flow Group in the list and click on
14
Result:
...................................................................................................................................................................................................
Continue with
15
...................................................................................................................................................................................................
Select the respective entry (with the descriptor none) in the list and click on
16
Flow Table
Result:
...................................................................................................................................................................................................
Continue with
17
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
The two default Flow Descriptors none and other are created.
The field
Insert Flow Group
Insert Flow Group
The
Insert Flow Group
Descriptor
field enter an appropriate descriptor and in the
Refer to
8-141).
Step
18.
The
Edit Flow Group
Descriptor
field enter an appropriate descriptor and in the
Refer to
8-141).
Step
18.
The selected Flow Group is deleted.
Step
18.
.
The selected Flow Table is deleted.
Step
18.
Alcatel-Lucent - Proprietary
is applicable.
.
screen is displayed.
"Parameters for provisioning Flow Identification Tables"
Edit Flow Group
screen is displayed.
"Parameters for provisioning Flow Identification Tables"
Delete Flow Group
See notice on first page
Provision QoS Flow Identification Table
.
none
Profile ID
.
Profile ID
.
field enter
field enter
Delete
8-139