Alcatel-Lucent 1643 AMS User's Operation Manual page 473

Traffic provisioning
Acceptable Frame
Type
Ingress Filter
Mode
WAN port information details
This table gives an overview of the WAN port information details which, depending on
the Virtual Switch mode, must be provisioned.
Port
Channel
Ingress Filter
Acceptable Frame
Type
Default User Priority
PVID
STP Port State
STP Port Priority
STP Port Path Cost
WAN port capacity
On the 1643 AM or 1643 AMS network element, there are 4 WAN ports totally in a
LAN unit. The mode of the WAN ports 1~4 is given in the table below. Each mode
stands for a type of the capacity combination of the WAN ports. Any other
combination is not allowable currently. Each of the factors Xa, Xb, Xc and Xd can be
range from 1 to 5 respectively
Mode
1
2
3
4
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Repeater
x
x
Capacity WAN Capacity WAN
port 1 port 2
100 Mbit/s Xb * 2 Mbit/s
50 Mbit/s 50 Mbit/s
50 Mbit/s Xb * 2 Mbit/s
Xa * 2 Mbit/s 50 Mbit/s
Alcatel-Lucent - Proprietary
See notice on first page
Parameters for provisioning LAN unit in spanning tree
x
x
x
Spanning LAN VPN
Tree
x x
x x
x
x
x
x
x
x
x
Capacity WAN
port 3
Xc * 2 Mbit/s
Xc * 2 Mbit/s
Xc * 2 Mbit/s
Xc * 2 Mbit/s
mode
LAN
Interconnect
x
x
Capacity WAN
port 4
Xd * 2 Mbit/s
Xd * 2 Mbit/s
Xd * 2 Mbit/s
Xd * 2 Mbit/s
8-121