Timing provisioning
Result:
...................................................................................................................................................................................................
Select a port (or a "-") from the list for the Reference.
4
Result:
selected) or the Working Reference for the timing source is unassigned (in case "-"
is selected).
...................................................................................................................................................................................................
5
Click
Result:
is sent to the network element.
...................................................................................................................................................................................................
Click
6
Result:
E
N D
...................................................................................................................................................................................................
Assign references to timing sources
To assign a working and protection timing reference to a timing source for the 1643
AM or 1643 AMS working in the STM-4 mode with STM-1 tributaries, follow this
procedure:
...................................................................................................................................................................................................
Select Provisioning --> Timing --> Timing Sources
1
Result:
...................................................................................................................................................................................................
Select a source that must be edited from the list and click
2
Result:
...................................................................................................................................................................................................
Select a slot (or a "-") from the list under Working Reference.
3
Result:
...................................................................................................................................................................................................
Select a port (or a "-") from the list for the Working Reference.
4
Result:
selected) or the Working Reference for the timing source is unassigned (in case "-"
is selected).
...................................................................................................................................................................................................
Select a slot (or a "-") from the list under Protection Reference.
5
....................................................................................................................................................................................................................................
7-20
A list of all possible ports (or a "-" ) appears for the selected slot.
The Working Reference for the timing source is selected (in case a port is
OK
to confirm the current settings.
The Assign Timing Reference to Timing Source window is closed and data
Close
.
The Provisioned NE Timing Source Information window disappears.
O F
S T E P S
The Provisioned NE Timing Source Information window appears.
The Assign Timing Reference to Timing Source window appears.
A list of all possible ports (or a "-" ) appears for the selected slot.
The Working Reference for the timing source is selected (in case a port is
Alcatel-Lucent - Proprietary
See notice on first page
Provisioning timing sources
Assign.
365-312-807R7.2
Issue 4, May 2007