Ericsson CF888 User Manual page 22

Hide thumbs Also See for CF888:
Table of Contents

Advertisement

Some fea tures/menus are op era tor dependent
To save the number in the phone mem ory, in a po si tion
you de cide:
Press the navi ga tion key
en ter the po si tion and then press
Tip!
If you have en tered a number in the scratch pad dur ing a call,
you can store it in the Phone Book by se lect ing Store from
the Phone book menu while you have the number in the
dis play.
Over write Pro tec tion
If you try to store a phone number in a po si tion which al ready
con tains a phone number, the mes sage Used Over -
STORE
2
Used
write? ap pears in the dis play. You then have the two
Overwrite?
following op tions.
To store the number in a dif fer ent po si tion:
Œ
Press
.
NO
En ter the new po si tion number.
Ž
Press
YES
To store the number in the se lected po si tion, thus eras ing the
old number:
l Press
.
YES
When the Memo ries are Full
If you try to store a phone number when all the po si tions
in the card mem ory are oc cu pied, a po si tion number in the
phone mem ory will be sug gested in the top line of the dis -
play.
If both memo ries are full, no po si tion number will be
sug gested. If you still wish to store the phone number,
you have to en ter the number of an al ready oc cu pied po -
si tion, thus eras ing the old number.
18
, press the # key once,
RIGHT
.
YES
STORE
e: Bankbyphone
040556677p_
Re calling a Phone Num ber
Storing a Num ber With a Tone Sig nal Code
In or der to, for ex am ple, per form bank ing by phone or con -
trol a phone an swer ing ma chine, you will need to use codes.
These codes are sent as tone sig nals (also called DTMF
tones).
Note!
Any thing en tered af ter a pause is sent as DTMF tones from
the Phone Book.
If you want to save the phone number in the Phone Book to -
gether with the codes:
Œ
Fol low the in struc tions on how to store a phone
number un til en ter ing the number.
Af ter you en ter the phone number, press and hold the
* key un til the pause char ac ter ' p ' ap pears.
34
Ž
En ter the code.
If needed, in sert an other pause, an other code and so on.
Con tinue fol low ing the in struc tions on how to store a
phone number.
When you make the call, the phone will dial the number, wait
un til the call is an swered and send the code. If you in serted
an other pause and an other code, it will pause again, send the
next code and so on.
The Speed Di al ing Fa cil ity
You can call the phone num bers that you store in the po si -
tions 1 – 9 in the card mem ory by en ter ing the po si tion number
and then press ing
. There fore, you should save po si tions
YES
1 – 9 for im por tant num bers.

Advertisement

Table of Contents
loading

Table of Contents