Esc+Q Print Quantity - SATO S84EX Programming Reference Manual

3.1 Control
Print Quantity
3.1

ESC+Q Print Quantity

ESC
Hexadecimal
code <1B>
16
Initial value aaaaaa=1
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between item
[Function]
Specifying the number of labels to print.
[Format]
<Q>aaaaaa
●Parameter
a[Number of labels to print]
[Coding Example] Number of labels: 2
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Notes]
1. Print contents specified by Start of Data Transmission <A> and End of Data Transmission <Z> are regarded as 1 label, and
the number of reprints can be specified.
2. Use this command prior to End of Data Transmission <Z>.
[Remark]
The reprint will be performed based on the specified print quantity. If specifying Sequential Numbering <F>, the value of
sequential number that was set up for that field portion will print.
Q Parameter
<51> aaaaaa
16
The set parameter is not maintained.
The parameter preset will be invalid.
The parameter preset will be invalid.
= Valid range: 1 to 999999
12
ESC+Q