[Esc+Q] Print Quantity - SATO CL4NX Programming Reference Manual

[ESC+Q] Print Quantity

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the number of labels to print.
[Format]
<Q>aaaaaa
• Parameter
a [Number of labels to print] = Valid range: 1 to 999999
[Coding Example]
Number of labels: 2
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
• Print contents specified by Start of Data Transmission <A> and End of Data Transmission <Z>
are regarded as 1 label, and the number of reprints can be specified.
• Use this command prior to End of Data Transmission <Z>.
[Note]
• Reprint will be performed based on the specified print quantity. If specifying sequential
numbering command <F>, the value of sequential number that was set up for that field portion
will be printed.
• When this command is used in combination with Multiple Cutting <~>, the specified print
quantity multiplied by specified value for cutting becomes the number of labels to print.
Parent topic Control command
ESC
<1B>
16
aaaaaa=1
When the power is OFF
Valid range within items
Valid range between items
27
Q
<51>
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Parameter
aaaaaa