Adjust Position Of Label Sensor - SATO Argox XM4 Series User Manual

XM4 Series Printer
User Manual

3.7.3 Adjust Position of Label Sensor

Function of the label sensor is to detect the gap, notch, or holes of labels, to help
the printer for accurate print positions and label length. For labels with gaps, label
sensor can be positioned wherever media locates. If labels with notches or holes
are in use, pull in or out Paper Sensor Position Lever, to horizontally adjust position
.
of label sensor
- Make sure the Media sensor position mark locates right on notch or hole
of labels. Check below.
Paper Sensor Position Lever
54
Paper Sensor
Position Lever