Debug Tunnel - Cisco Aironet Wave 2 Cli Command Reference Manual

debug Commands

debug tunnel

To configure debugging of tunnel, use the debug tunnel command.
debug tunnel eogre
Syntax Description
eogre
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable debugging of EoGRE tunnel:
cisco-wave2-ap# debug tunnel eogre
Configures debugging of EoGRE tunnel
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7

debug tunnel

75