Show Processes - Cisco Aironet Wave 2 Cli Command Reference Manual

show Commands

show processes

To view process utilization details, use the show processes command.
showprocesses {cpu cpu-number |dmalloc {capwap | wcp} |status}
Syntax Description
cpu cpu-number
dmalloc
capwap
wcp
status
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
The following example shows how to view the process watchdog status:
cisco-wave2-ap# show processes status
Displays the specified CPU's utilization of the processes; valid range of values for the
CPU number is between 0 to 3
Displays the process utilization of the dmalloc processes
Displays dmalloc statistics for CAPWAP
Displays dmalloc statistics for WCP
Displays watchdog process status
Modification
This command was
introduced.
Process
capwapd
switchdrvr
wcpd
kclick
cleanaird
mrvlfwd
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
Alive Monitored
True True
True False
True True
True True
True True
True True

show processes

123