Ipv6 Tunnel - Cisco Small Business WAP551 Administration Manual

Wireless-n access point with poe/ wireless-n selectable-band access point with poe
Hide thumbs Also See for Small Business WAP551:
Table of Contents

Advertisement

LAN

IPv6 Tunnel

STEP 3
NOTE
IPv6 Tunnel
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
IPv6 Link Local Address—The IPv6 address used by the local physical link.
The link local address is not configurable and is assigned by using the IPv6
Neighbor Discovery process.
Default IPv6 Gateway—The statically configured default IPv6 gateway.
IPv6 DNS Nameservers—Select one of the following values:
-
Dynamic—The DNS name servers are learned dynamically through
DHCPv6.
-
Manual—You specify up to two IPv6 DNS name servers in the fields
provided.
Click Save. The changes are saved to the Startup Configuration.
After new settings are saved, the corresponding processes may be stopped and
restarted. When this happens, the WAP device may lose connectivity. We
recommend that you change WAP device settings when a loss of connectivity will
least affect your wireless clients.
The WAP551 and WAP561 devices support the Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP). ISATAP enables the WAP device to transmit IPv6
packets encapsulated within IPv4 packets over the LAN. The protocol enables the
WAP device to communicate with remote IPv6-capable hosts even when the LAN
that connects them does not support IPv6.
The WAP device acts as an ISATAP client. An ISATAP enabled host or router must
reside on the LAN. The IP address or hostname of the router is configured on the
WAP device (by default, it is isatap). If configured as a hostname, the WAP device
communicates with a DNS server to resolve the name into one or more ISATAP
router addresses. The WAP device then sends solicit messages to the router(s).
When an ISATAP-enabled router replies with an advertisement message, the WAP
device and router establish the tunnel. The tunnel interface is assigned a link-local
and a global IPv6 address, which serve as virtual IPv6 interfaces on the IPv4
network.
When IPv6 hosts initiate communication with the WAP device connected via the
ISATAP router, the IPv6 packets are encapsulated into IPv4 packets by the ISATAP
router.
4
56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Small business wap561

Table of Contents