debug rrm neighbor
debug rrm neighbor
To enable RRM neighbor debugging, use the debug rrm neighbor command.
debug rrm neighbor {tx | rx | detail }
Syntax Description
tx
rx
detail
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable debugging of RRM neighbor transmissions:
cisco-wave2-ap# debug rrm neighbor tx
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
68
Enable RRM neighbor Tx debugging
Enable RRM neighbor Rx debugging
Enable RRM neighbor detail debugging
Modification
This command was
introduced.
debug Commands