Capwap Ap - Cisco Aironet Wave 2 Cli Command Reference Manual

capwap ap

capwap ap
To configure the primary, secondary and tertiary controllers for the AP, use the capwap ap command.
capwap ap {primary-base | secondary-base | tertiary-base}
controller-name controller-ip-address
Syntax Description
primary-base
secondary-base
tertiary-base
controller-name
controller-ip-address
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to configure the primary controller for the AP:
cisco-wave2-ap# capwap ap primary-base wlc-5520 209.165.200.224
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
10
Configure AP's primary controller
Configure AP's secondary controller
Configure AP's tertiary controller
Name of the controller
IP address of the controller.
Modification
This command was
introduced.
capwap Commands