Show Trace Dot11_Chn - Cisco Aironet Wave 2 Cli Command Reference Manual

show Commands

show trace dot11_chn

To view off-channel events on 802.11 channel of an AP, use the show trace dot11_chn command.
show trace dot11_chn {enable |disable |statistics}
Syntax Description
enable
disable
statistics
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to view off-channel event statistics on 802.11 radios:
cisco-wave2-ap# show trace dot11_chn statistics
Dot11Radio0 Off-Channel Statistics:
total_count in_prog_count last-chan last-type last-dur
Dot11Radio1 Off-Channel Statistics:
total_count in_prog_count last-chan last-type last-dur
Enables displaying of off-channel events on the 802.11 radio 0 and 1
Disables displaying of off-channel events on the 802.11 radios 0 and
1
Displays off-channel event statistics on 802.11 radios 0 and 1
Modification
This command was
introduced.
0 0
0 0
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
0 0 0
0 0 0

show trace dot11_chn

137