Capwap Ap Ethernet - Cisco Aironet Wave 2 Cli Command Reference Manual

capwap Commands

capwap ap ethernet

To configure AP Ethernet parameters, use the capwap ap ethernet command.
capwap ap ethernet tag ethernet-vlan-id
Syntax Description
ethernet-vlan-id
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to configure Ethernet VLAN tagging on the AP:
cisco-wave2-ap# capwap ap ethernet tag 2
Ethernet VLAN ID; valid range is 0 to 4094. If you enter the VLAN ID value as 0, the
VLAN tagging is disabled.
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
capwap ap ethernet
13