debug Commands
debug cdp
To enable debugging of controller discovery protocol (CDP), use the debug cdp command.
debug cdp {adjacency | events | ilp | packets}
Syntax Description
adjacency
events
ilp
packets
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable debugging of CDP events:
cisco-wave2-ap# debug cdp events
Enables debugging of CDP neighbors
Enables debugging of CDP events
Enables debugging of inline power
Enables debugging of CDP packets
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
debug cdp
49