Config Boot Baudrate - Cisco Aironet Wave 2 Cli Command Reference Manual

config boot baudrate

config boot baudrate

To set the baud rate, use the config boot baudrate command.
config boot baudrate {115200 | 9600}
Syntax Description
115200
9600
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to configure the baud rate to 9600:
cisco-wave2-ap# config boot baudrate 9600
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
32
Sets the baud rate to
115200
Sets the baud rate to 9600
Modification
This command was
introduced.
config Commands