Clear Cts - Cisco Aironet Wave 2 Cli Command Reference Manual

clear cts

clear cts
To clear the statistics of Cisco TrustSec Security, use the clear cts command.
clear cts role-based counters [all | client mac-addr | from sgt to dgt]
Syntax Description
counters
all
client mac-addr
from
sgt
to
dgt
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
This example shows you how to clear all the statistics of Cisco TrustSec Security counters:
cisco-wave2-ap# clear cts role-based counters all
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
22
Clears Cisco TrustSec summary counters
Clears all Cisco TrustSec counters
Clears the Cisco TrustSec counters for a client MAC address specified in
xx:xx:xx:xx:xx:xx format
Specifies the source group tag for filtered traffic
Security Group Tag (SGT); valid values are 0 to 65535
Specifies the destination group tag for filtered traffic
Destination Group Tag (DGT); valid values are 0 to 65535
Modification
This command was
introduced.
clear Commands