Debug Dot11 Driver Slot - Cisco Aironet Wave 2 Cli Command Reference Manual

debug Commands

debug dot11 driver slot

To enable debugging of 802.11 drivers, use the debug dot11 driver slot command.
debug dot11 driver slot {0 | 1} {all | {cac {info | metrics}} | chd | save-acnt-data |
save-on-failure [extended] | stop-on-failure | tsm | vim}
Syntax Description
slot {0 | 1}
all
cac
cac info
cac metrics
chd
save-acnt-data
save-on-failure
save-on-failure extended
stop-on-failure
tsm
vim
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable debugging of CAC at the information level:
cisco-wave2-ap# debug dot11 driver slot cac info
Enables 802.11 driver debugs per radio
Enables all 802.11 driver debugs
Enables 802.11 CAC debugs
Enables 802.11 CAC info level debugs
Enables debugging of 802.11 CAC metrics
Enables 802.11 CHD debugs
Saves the radio accounting data
Saves the radio crash information upon radio failure
Saves extended information on radio failure
Stops the AP from reboot on radio failure
Enables 802.11 traffic stream metric debugs
Enables 802.11 video metric debugs
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7

debug dot11 driver slot

55