Debug Capwap Client Avc - Cisco Aironet Wave 2 Cli Command Reference Manual

debug capwap client avc

debug capwap client avc

To enable debugging of CAPWAP client AVC, use the debug capwap client avc command.
debug capwap client avc {all | detail | error | event | info | netflow {all | detail | error
| event | packet} | numflows}
Syntax Description
all
detail
error
event
info
netflow
netflow all
netflow detail
netflow error
netflow event
netflow packet
numflows
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable debugging of all CAPWAP client AVC:
cisco-wave2-ap# debug capwap client avc all
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
48
Enables debugging of all CAPWAP client AVC
Enables debugging of CAPWAP AVC detail
Enables debugging of CAPWAP AVC error
Enables debugging of CAPWAP AVC event
Enables debugging of CAPWAP AVC information
Enables debugging of CAPWAP client AVC NetFlow
Enables debugging of all CAPWAP client AVC NetFlow
Enables debugging of CAPWAP client AVC NetFlow detail
Enables debugging of CAPWAP client AVC NetFlow error
Enables debugging of CAPWAP client AVC NetFlow event
Enables debugging of CAPWAP client AVC NetFlow packet
Enables debugging of CAPWAP client AVC numflows
Modification
This command was
introduced.
debug Commands