Debug Process Memory - Cisco Aironet Wave 2 Cli Command Reference Manual

debug Commands

debug process memory

To process memory debugging, use the debug process memory command.
debug process memory {diff |realtime [interval interval-in-seconds ] |start}
Syntax Description
diff
realtime
interval
start
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable the start of debugging of process memory:
cisco-wave2-ap# debug process memory start
Process memory debug show diff
Process memory real time debug
Update interval; valid range 1 to 1000000 seconds
Process memory debug start
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7

debug process memory

73