Debug Memory Pool - Cisco Aironet Wave 2 Cli Command Reference Manual

debug memory pool

debug memory pool

To debug memory pool, use the debug memory pool command.
debug memory pool {diff | realtime interval 1-1000000-seconds | start}
Syntax Description
diff
realtime interval 1-1000000-seconds
start
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to configure realtime interval of 180 seconds for the memory
pool:
cisco-wave2-ap# debug memory pool realtime interval 180
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
62
Modification
This command was
introduced.
Shows memory pool debug difference in detail
Configures realtime interval for the memory pool
Starts the debug for the memory pool
debug Commands