config Commands
config boot path
To configure the boot path, use the config boot path command.
config boot path {1 | 2}
Syntax Description
{1 | 2}
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to configure the booth path as 1:
cisco-wave2-ap# config boot path 1
Path to be specified as Part 1 or Part
2
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
config boot path
37