Config Ap Client-Trace Output - Cisco Aironet Wave 2 Cli Command Reference Manual

config Commands

config ap client-trace output

To configure the trace output, use the config ap client-trace output command.
config ap client-trace output console-log {disable | enable}
Syntax Description
console-log
disable
enable
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
The following example shows you how to configure the trace output:
cisco-wave2-ap# config ap client-trace output
Displays trace output to console and log
Disables trace output to console and log
Enables trace output to console and log
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7

config ap client-trace output

31