Show Flexconnect - Cisco Aironet Wave 2 Cli Command Reference Manual

show flexconnect

show flexconnect

To view the flexconnect information for an access point, use the show flexconnect command.
show flexconnect {calea | cckm | client [aaa-override | counter | priority] | dot11r |
mcast | oeap | pmk | status | vlan-acl | wlan}
Syntax Description
calea
cckm
client
aaa-override
counter
priority
dot11r
mcast
oeap
pmk
status
vlan-acl
wlan
User EXEC (>)
Command Modes
Privileged EXEC (#)
Command History
Release
8.1.111.0
The following example shows how to view the information about a client of a FlexConnect AP:
cisco-wave2-ap# show flexconnect client
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
110
Displays the calea information
Displays the CCKM cache entry information
Displays the client information
Specifies the AAA override parameters
Specifies the counter for all clients
Specifies the client priority
Displays the 802.11r cache entry information
Displays the multicast information
Displays the FlexConnect OEAP information
Displays the OKC or PMK cache entry information
Displays the standalone status
Displays the VLAN ACL mapping
Displays the WLAN configuration
Modification
This command was
introduced.
show Commands