clear Commands
clear datapath
To clear the datapath counters or drops, use the clear datapath command.
clear datapath {drops | statistics}
Syntax Description
drops
statistics
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
This example shows you how to clear the datapath drop counters:
cisco-wave2-ap# clear datapath drops
Clears the datapath drop counters
Clears the datapath counters
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
clear datapath
23