Connecting the VEN402 Client to a Set-Top, DVR,
or DMA
Complete the following steps to connect the VEN402 Client to a set-top, DVR, or
DMA.
1
Connect the 12 VDC Power Supply plug to the wall power outlet. Use only the
power adapter provided with this product.
2
Connect the power jack to the power port on the VEN402.
3
Connect one end of the RJ-45 Ethernet cable to the Ethernet port on the VEN402.
4
Connect the other end of the RJ-45 Ethernet cable to an available Ethernet port on
a set-top, DVR, or DMA.
4038769 Rev 01
DRAFT
Connecting the VEN402 Client to a Set-Top, DVR, or DMA
5