Chapter 6 Checking The Health Of The Network; Show Mesh Commands - Cisco Mesh Access Points Deployment Manual

Checking the Health of the Network
This chapter describes how to check the health of a mesh network and contains the following sections:
•
•
•

Show Mesh Commands

The show mesh commands are grouped under the following sections:
•
•
•
•
To view a summary of possible show mesh commands, enter this command:
(Cisco Controller) >
env
backhaul
neigh
path
astools
stats
secbh-stats
per-stats
queue-stats
security-stats Show AP security stats.
ap
config
secondary-backhaul Show mesh secondary-backhaul
ids-state
client-access
public-safety
background-scanning Show mesh background-scanning state.
cac
OL-27593-01
Show Mesh Commands, page 193
Viewing Mesh Statistics for a Mesh Access Point, page 199
Viewing Neighbor Statistics for a Mesh Access Point, page 203
Viewing General Mesh Network Details
Viewing Mesh Access Point Details
Viewing Public Safety Setting
Viewing Security Settings and Statistics
show mesh ?
Show mesh environment.
Show mesh AP backhaul info.
Show AP neigh list.
Show AP path.
show mesh astools list
Show AP stats.
Show Mesh AP secondary backhaul stats.
Show AP Neighbor Packet Error Rate stats.
Show AP local queue stats.
Show mesh ap summary
Show mesh configurations.
Show mesh ids-state
Show mesh backhaul with client access.
Show mesh public safety.
Show mesh cac.
C H A P T E R
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
6
193