Network > [1] Ethernet > (Choose The Bus Module Or On-Board) > [1] Module - Bosch B9512G-E Installation Manual

Control Panels
2.
3.
4.
5.
6.
20.1.5 [2] Network > [1] Ethernet > (choose the bus module or on-board) > [1]
Module Parameters menu
You can use DCHP/AutoIP or UPnP for Ethernet communication with the on-board Ethernet or
a B426. In this menu, you can enable and disable these protocols.
DHCP/AutoIP Enable
UPnP Enable
IPv4 Address
IPv4 Subnet Mask
Default Gateway
HTTP Port Number
IPv4 Server Address
IPv6 Server Address
Module Hostname
DHCP/AutoIP Enable
1.
2.
3.
4.
5.
UPnP Enable
1.
2.
3.
Bosch Security Systems, Inc.
Go to [1] Programming Menu > [1] Reporting > [4] Personal Note. The keypad shows
the phone number or email address of the selected personal notification destination.
Use /Previous or /Next to scroll through the list of destinations and go to the
destination you want to program.
Press Edit or Enter to edit the phone number or email address.
Delete existing characters, if necessary, and then enter the new characters.
Press Save or Enter. The keypad shows Parameter saved.
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [1] Programming Menu > [2] Network > [1] Ethernet > (choose the bus module or
on-board) > [1] Module Parameters > [1] DHCP Enable. The keypad shows the DHCP/
AutoIP current configuration.
Depending on the keypad model:
Press Yes or No.
-or-
Press Enter to edit the DHCP/AutoIP Enable configuration for the module. Use Previous
or Next to toggle between Yes and No..
Press Save or Enter. The keypad shows Parameter saved.
Escape from the menu.
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [1] Programming Menu > [2] Network > [1] Ethernet > (choose the bus module or
on-board) > [1] Module Parameters > [2] UPnP Enable. The keypad shows the UPnP
current configuration.
Depending on the keypad model:
Press Yes or No.
-or-
Default Module settings
Yes Yes/No
Yes Yes/No
0.0.0.0 _______________________________
255.255.255.255 _______________________________
0.0.0.0 _______________________________
80 _______________________________
0.0.0.0 _______________________________
0.0.0.0 _______________________________
Blank _______________________________
Installation Manual
Keypad Installer menu | en 135
2018.07 | 10 | F.01U.303.996