Reporting > [2] Network Menu Parameters - Bosch B9512G-E Installation Manual

Control Panels
5.
6.
7.
Phone Format
1.
2.
3.
4.
5.
6.
20.1.2 [1] Reporting > [2] Network menu parameters
Enhanced communications is the ability to communicate by some means other than a standard
digital dialer. The control panel can include four separate enhanced communication
destinations to which the control panel can route events. In this menu, you can enable
enhanced communication and edit the network address, network address, poll rate, and port
number for each destination (D1, D2, D3, and D4).
D1
D2
D3
D4
Enhanced Comm
1.
2.
3.
4.
Network Address
Port Number
Bosch Security Systems, Inc.
Press Edit.
-or-
Press Enter to edit the phone destination and then Enter to edit the phone number for
the selected destination.
Delete existing characters, if necessary, and then enter the new phone number.
When finished, press Enter or Save to save the phone number. The keypad shows
Parameter saved.
Escape from the menu.
Enter the installer passcode, and then go the [1] Installer Menu.
Go to [1] Programming Menu > [1] Reporting > [1] Phone. The keypad shows the phone
number and phone format for the phone destination.
Use /Previous or /Next to go to the destination you want to edit.
Depending on keypad model:
Press Enter to edit the phone destination, and then press Next to go to the format
option, and then press Enter to edit the phone format for the selected destination.
Press Format and then Edit. Use
ID and Modem4 option, and press Format while viewing the desired format to select it
and save the programming. The keypad shows Parameter saved.
Escape from the menu.
Network address __________________________ Poll rate ___________
Network address __________________________ Poll rate ___________
Network address __________________________ Poll rate ___________
Network address __________________________ Poll rate ___________
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [1] Programming Menu > [1] Reporting > [2] Network > [1] Enhanced Comm. The
keypad shows the Enhanced Comm option as well as the current default value.
Depending on keypad model:
Press Enter and then press Disable or Enable.
-or-
Press Enter.
Press Save or Enter. The keypad shows Parameter saved.
Escape from the menu.
/Previous or
Installation Manual
Keypad Installer menu | en 131
/Next to toggle between the Contact
Port number _______
Port number _______
Port number _______
Port number _______
2018.07 | 10 | F.01U.303.996