Reporting > [4] Personal Note Menu Parameters - Bosch B9512G-E Installation Manual

Control Panels
Options include:
No Device, Phone 1, Phone 2, Phone 3, Phone 4, SDI2-1 D1, SDI2-1 D2, SDI2-1 D3, SDI2-1 D4,
SDI2-2 D1, SDI2-2 D2, SDI2-2 D3, SDI2-2 D4, Onboard D1, Onboard D2, Onboard D3, Onboard
D4, Cellular D1, Cellular D2, Cellular D3, Cellular D4.
Primary Device
Backup Device
Primary (Destination)
1.
2.
3.
4.
5.
6.
7.
Backup (Destination)
Notice!
Keypads show and allow you to select the Backup Destination Device only after you select a
Primary Destination Device.
1.
2.
3.
4.
5.
6.
7.
20.1.4 [1] Reporting > [4] Personal Note menu parameters
The control panel can send text messages and emails for personal notification over Ethernet
or using a cellular communicator. You can configure up to 32 destinations using a combination
of cellular phone numbers and email addresses. The system considers an email address valid
if you copy it exactly as it appears from an internet email provider. In this menu, you can add a
phone number or email address to each personal notification identifier (1 through 32).
Notification
Number
Bosch Security Systems, Inc.
No Device
No Device
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [1] Programming Menu > [1] Reporting > [3] Routing.
Use /Previous or /Next to scroll through the list of routes and go to the route you
want to program.
Press Edit or Enter to edit the route.
Use /Previous or /Next to scroll through the list of devices (for destination 1) and
go to the destination 1 option you want to select for the current device (for example,
Phone 1). To keep destination 1, escape from the menu. To change to a different
destination (2, 3, or 4), press [Edit Destination], and continue to the next step.
Press Save or Enter. The keypad shows Parameter saved.
Escape from the menu.
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [1] Programming Menu > [1] Reporting > [3] Routing.
Use /Previous or /Next to scroll through the list of routes and go to the route you
want to program.
Press Edit or Enter to edit the route.
Use /Previous or /Next to scroll through the list of devices (for destination 1) and
go to the destination 1 option you want to select for the current device (for example,
Phone 1). To keep destination 1, escape from the menu. To change to a different
destination (2, 3, or 4), press [Edit Destination], and continue to the next step.
Press Save or Enter. The keypad shows Parameter saved.
Escape from the menu.
Phone number or email address
Route 1 Route 2
___________ ___________
___________ ___________
Installation Manual
Keypad Installer menu | en 133
Route 3 Route 4
___________ ___________
___________ ___________
2018.07 | 10 | F.01U.303.996