Display Vlan - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Extended VLAN Applications Chapter 1 Voice VLAN Configuration Commands
Caution:
The "Current voice vlan enable port mode" field lists the ports with the voice VLAN
function enabled. Note that a port listed in this field may not currently operate in a voice
VLAN. To check the ports operating in the current voice VLAN, use the display vlan
command, which is described in section1.1.3 "display vlan".

1.1.3 display vlan

Syntax
display vlan vlan-id
View
Any view
Parameter
vlan-id: Voice VLAN ID in the range of 1 to 4094.
Description
Use the display vlan command to display the automatic/manual ports in the current
voice VLAN.
Related command: voice vlan.
Example
# Display the ports included in the current voice VLAN, assuming that the current voice
VLAN is VLAN 6.
<3Com> display vlan 6
VLAN ID: 6
VLAN Type: static
Route Interface: not configured
Description: VLAN 0006
Name: VLAN 0006
Tagged
GigabitEthernet1/0/5
Untagged Ports:
GigabitEthernet1/0/6
The output indicates that GigabitEthernet1/0/5 and GigabitEthernet1/0/6 ports are in
the current voice VLAN.
Ports:
1-3