3Com Switch 7750 Series
Command Reference Guide — IP / IPX
SAP:
PING:
received
received
responses time out
3.1.5 ipx enable
Syntax
ipx enable
undo ipx enable
View
System view
Parameter
None
Description
Use the ipx enable command to enable IPX.
Use the undo ipx enable command to disabled IPX and delete all the IPX
configurations.
Note that after the undo ipx enable command is executed, the IPX configurations
cannot be recovered with the ipx enable command.
Example
# Enable IPX.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]ipx enable
Field
0 general requests received
0 specific requests received
0 GNS requests received
0 general responses sent
0 specific responses sent
0 GNS responses sent
0 periodic updates, 0 errors
0 requests sent, 0 requests
0 responses sent, 0 responses
0
responses
in
3-9
Chapter 3 IPX Configuration Commands
Statistics
number of received general request
packets, the number of special
request packets, the number of latest
request packets, the number of
transmitted periodic update packets,
and the number of received error
packets
Statistics
number
request packets, the number of
transmitted/received
packets, the number of prompt
time,
0
response packets, and the number of
timeout response packets
Description
of
SAP
packets:
of
Ping
packets:
of
transmitted/received
response
the
the