Ipx Encapsulation; Ipx Netbios-Propagation - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — IP / IPX

3.1.6 ipx encapsulation

Syntax
ipx encapsulation [ dot2 | dot3 | ethernet-2 | snap ]
undo ipx encapsulation
View
VLAN interface view
Parameter
dot2: Sets the encapsulation format to Ethernet_802.2.
dot3: Sets the encapsulation format to Ethernet_802.3.
ethernet-2: Sets the encapsulation format to Ethernet_II.
snap: Sets the encapsulation format to Ethernet_SNAP.
Description
Use the ipx encapsulation command to configure an IPX frame encapsulation format
on the current VLAN interface.
Use the undo ipx encapsulation command to restore the encapsulation format to the
default format.
By default, the IPX frame encapsulation format is Ethernet_802.3 (dot3).
Example
# Set the IPX frame encapsulation format to Ethernet_II on VLAN interface 2.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2
[3Com-Vlan-interface2] ipx encapsulation ethernet-2

3.1.7 ipx netbios-propagation

Syntax
ipx netbios-propagation
undo ipx netbios-propagation
View
VLAN interface view
Parameter
None
Chapter 3 IPX Configuration Commands
3-10