Dldp Reset - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DLDP
unidirectional links. On the contrary, if too short an interval is set, network traffic
increases, and port bandwidth is reduced. Generally, the STP convergence time is
30 seconds.
Example
# Set the interval of sending advertisement packets to 20 seconds for all the
DLDP-enabled ports.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dldp interval 20

1.1.5 dldp reset

Syntax
dldp reset
View
System view, Ethernet port view
Parameter
None
Description
In system view:
Use the dldp reset command to reset the DLDP status of all the ports disabled by
DLDP.
In Ethernet port view:
Use the dldp reset command to reset the DLDP status of the current port disabled by
DLDP.
After the dldp reset command is executed, the DLDP status of these ports changes
from disable to active and DLDP restarts to probe the link status of the fiber cables or
copper twisted pairs.
Related command: dldp, and dldp unidirectional-shutdown.
Example
# Reset the DLDP status of all the ports disabled by DLDP.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] dldp reset
Chapter 1 DLDP Configuration Commands
1-5