Multicast Static-Router-Port - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Multicast
View
System view
Parameter
None
Description
Use the multicast routing-enable command to enable the IP multicast routing feature.
Use the undo multicast routing-enable command to disable the IP multicast routing
feature.
The IP multicast routing feature is disabled by default.
Example
# Enable the IP multicast routing feature.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] multicast routing-enable

2.1.9 multicast static-router-port

Syntax
multicast static-router-port interface-type interface-number
undo multicast static-router-port interface-type interface-number
View
VLAN view
Parameter
interface-type: Port type.
interface-number: Port number.
Description
Use the multicast static-router-port command to specify the Ethernet port as the
static router port of the current VLAN.
Use the undo multicast static-router-port command to disable the static router port
configuration.
By default, no static router port is configured for the VLAN.
Chapter 2 Common IP Multicast Configuration Commands
2-11