Garp Timer Leaveall - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide — GVRP Commands
Timer
Join
Leave
LeaveAll
Related command: display garp timer.
Example
# Set the GARP Join timer to 20 centiseconds for port Ethernet1/0/1.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Ethernet1/0/1
[3Com-Ethernet1/0/1] garp timer join 20

1.1.4 garp timer leaveall

Syntax
garp timer leaveall timer-value
undo garp timer leaveall
View
System view
Parameter
timer-value: Setting (in centiseconds) of the GARP LeaveAll timer. You need to set this
argument with the Leave timer settings of other Ethernet ports as references. That is,
this argument needs to be larger than the Leave timer settings of any Ethernet ports.
Lower threshold
This lower threshold
greater than or equal to twice
the timeout time of the Hold
timer. You can change the
threshold by changing the
timeout time of the Hold
timer.
This lower threshold
greater than twice the timeout
time of the Join timer. You
can change the threshold by
changing the timeout time of
the Join timer.
This lower threshold
greater than the timeout time
of the Leave timer. You can
change threshold
changing the timeout time of
the Leave timer.
1-4
Chapter 1 GVRP Configuration Commands
Upper threshold
is
This upper threshold is less than
one-half of the timeout time of the
Leave timer. You can change the
threshold by changing the timeout
time of the Leave timer.
is
This upper threshold is less than the
timeout time of the LeaveAll timer.
You can change the threshold by
changing the timeout time of the
LeaveAll timer.
is
32,765 centiseconds
by