Display Qos-Interface Mirrored-To - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Mirroring
Information displayed on the source mirroring group for remote mirroring includes:
Group number
Group type: remote-source
Group status
Information of the source port
Information of the reflector port
Remote-probe VLAN information
Example
# Display the parameter settings of the mirroring group.
<3Com> display mirroring-group all
mirroring-group 2:
type: local
status: active
mirroring port:
monitor port: GigabitEthernet1/0/4

1.1.2 display qos-interface mirrored-to

Syntax
display qos-interface [ interface-type interface-number ] mirrored-to
View
Any view
Parameter
interface-type interface-number: Port of the switch. If you enter this argument, the
switch will display the parameter settings of the specified port. If not, the switch will
display the parameters settings of all ports.
Description
Use the display qos-interface mirrored-to command to display the parameter
settings of traffic mirroring.
Information displayed includes:
Port name and action name of traffic mirroring
Direction of traffic mirroring
ACL for identifying traffics
Mirroring group
Related command: mirrored-to
GigabitEthernet1/0/1 both
1-2
Chapter 1 Mirroring Commands