Voice Vlan Mac-Address - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Extended VLAN Applications Chapter 1 Voice VLAN Configuration Commands
Use the undo voice vlan enable command to disable the voice VLAN function for a
port.
The voice VLAN function takes effect on a port only when it is enabled in both
system view and port view.
The access port working in automatic mode does not support the voice VLAN
function.
Related command: display voice vlan status.
Example
# Enable the voice VLAN function for Ethernet1/0/2 port.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Ethernet 1/0/2
[3Com-Ethernet1/0/2] voice vlan enable

1.1.7 voice vlan mac-address

Syntax
voice vlan mac-address oui mask oui-mask [ description text ]
undo voice vlan mac-address oui
View
System view
Parameter
oui: MAC address to be set. You need to provide this argument in the format of H-H-H.
Note:
Organizationally unique identifier (OUI) is the first 24 bits of a MAC address. It is the
global unique identifier assigned by IEEE for different device supplier.
oui-mask: MAC address mask in the format of H-H-H. This argument specifies the valid
bits of the MAC address.
text: Description string of the MAC address. This argument can contain 1 to 30
characters.
Description
Use the voice vlan mac-address command to set a MAC address used for a voice
VLAN to identify voice devices.
1-6