Display Arp Proxy; Display Arp Slot - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – ARP

1.1.13 display arp proxy

Syntax
display arp proxy [ interface interface-type interface-number ]
View
Any view
Parameter
interface-type: Interface type.
interface-number: Interface number.
For more information about arguments, refer to the interface command in the Port
Basic Configuration Command Manual.
Description
Use the display arp proxy command to display ARP proxy state: enabled/disabled.
Related command: arp proxy enable.
Example
# Display ARP proxy state for VLAN 2 interface.
<3Com> display arp proxy interface Vlan-interface 2
Interface Vlan-interface2
Proxy ARP status: disabled

1.1.14 display arp slot

Syntax
display arp slot slot-id
View
Any view
Parameter
slot-id: ID of a slot.
Description
Use this command to display the ARP mapping table of all ports on the specified slot.
Example
# Display the ARP mapping table on the third slot.
<3Com> display arp slot 3
Chapter 1 ARP Configuration Commands
1-11