3Com 7750 Series Command Reference Manual page 38

3Com Switch 7750 Series
Command Reference Guide – Login
Description
Use the snmp-agent usm-user command to add a user to a specified SNMP group.
You can also optionally use this command to apply an ACL to filter network
management users.
Use the undo snmp-agent usm-user command to remove a user from the
corresponding SNMP group. The operation also frees the user from the
corresponding ACL-related configuration.
Example
# Add the user named "3Com" to the SNMP group named "3Comgroup", specifying to
authenticate the user, specifying the authentication protocol to be HMAC-MD5-96, the
authentication password to be "3Com", and applying ACL 2002 to filter network
management users (assuming that ACL 2002 already exists).
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] snmp-agent usm-user v3 3Com 3Comgroup authentication-mode md5 3Com acl
2002
Chapter 2 Commands for User Control
2-5