Display Dhcp Server Expired - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP
10.110.1.2
Table 1-1 Description on the fields of the display dhcp server conflict command
Address
Discover Time

1.1.16 display dhcp server expired

Syntax
display dhcp server expired { ip ip-address | pool [ pool-name ] | interface
[ interface-type interface-number ] | all }
View
Any view
Parameter
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string
of 1 to 35 characters, is the name of an address pool. If you do not provide this
argument, this command applies to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not
specify a VLAN interface, this command applies to all VLAN interfaces.
all: Specifies all DHCP address pools.
Description
Use the display dhcp server expired command to display the lease expiration
information about one IP address, or the lease expiration information about all IP
addresses in one or all DHCP address pools. When all the IP addresses in an address
pool are assigned, the DHCP server assigns the IP addresses that are expired to
DHCP clients.
Example
# Display the lease expiration information about the IP addresses in all DHCP address
pools.
<3Com> display dhcp server expired all
Global pool:
IP address
Chapter 1 DHCP Server Configuration Commands
Jan 11 2003 11:57:07 PM
Field
Hardware address
1-15
Description
Conflicting IP address
Time when the conflict is detected
Lease expiration Type