Arp Proxy Enable; Arp Proxy Source-Vlan Enable - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – ARP
[3Com] interface GigabitEthernet 3/0/1
[3Com GigabitEthernet3/0/1] arp max-dynamic-entry 6000

1.1.4 arp proxy enable

Syntax
arp proxy enable
undo arp proxy enable
View
VLAN interface view
Parameter
None
Description
Use the arp proxy enable command to enable ARP proxy function.
Use the undo arp proxy enable command to disable ARP proxy function. With the arp
proxy enable command configured, a switch can realize the communication between
hosts (belong to different VLAN) connected to the switch through its layer 3 forwarding
function.
By default, ARP proxy function is disabled.
Related command: display arp proxy.
Example
# Enable ARP proxy for VLAN 2 interface.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2
[3Com-Vlan-interface2] arp proxy enable

1.1.5 arp proxy source-vlan enable

Syntax
arp proxy source-vlan enable
undo arp proxy source-vlan enable
View
VLAN interface view
Chapter 1 ARP Configuration Commands
1-3