Apply Cost-Type; Apply Ip Next-Hop - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol

6.1.4 apply cost-type

Syntax
apply cost-type [ internal | external ]
undo apply cost-type
View
Route policy view
Parameter
internal: Used in BGP, indicates that the IGP cost will be used as the BGP MED value
when BGP peer entity advertises routes to the EBGP peer entity. This keyword is
used only for IS-IS (representing that IS-IS interior cost will be used) and is invalid for
other protocols.
External: This keyword is used only for IS-IS and is invalid for other protocols.
Description
Use the apply cost-type command to set the routing cost type of routing information.
Use the undo apply cost-type command to cancel the setting argument.
By default, routing cost is not set.
Example
# Set IGP cost as the BGP MED value.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com]route-policy 10 permit node 10
[3Com-route-policy] apply cost-type internal

6.1.5 apply ip next-hop

Syntax
apply ip next-hop ip-address
undo apply ip next-hop
View
Route policy view
Parameter
ip-address: IP address of next hop
Chapter 6 IP Routing Policy Configuration Commands
6-4