Poe Enable - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – PoE
Description
Use the display poe pse command to display the parameters of all boards that serve
as power sourcing equipment (PSE).
Example
# Display the parameters of all boards that serve as PSE on the switch.
<3Com> display poe pse
PSE Information of board 4:
Power Current Value
Power Max Value
Power Peak Value
Power Average Value
Software Version
Hardware Version
CPLD Version
Table 1-3 Description on the fields of the display poe pse command
Power Current Value
Power Max Value
Power Peak Value
Power Average Value
Software Version
Hardware Version
CPLD Version

1.1.5 poe enable

Syntax
poe enable
undo poe enable
View
Ethernet port view
Parameter
None
:450 W
:806 W
:700 W
:475 W
:290
:000
:000
Field
1-7
Chapter 1 PoE Configuration Commands
Description
Current power of the board
Maximum power of the board
Peak power of the board
Average power of the board
Version of the PSE software
Version of the PSE hardware
Version of the PSE complex programmable
logic device (CPLD)